Netgear router login via routerlogin.net

Accessing the Netgear wireless router for the setup is the first and the foremost process to be carried out by the users as their Netgear networking devices will not be of any use if they are not configured properly. The admin set up a page of the Netgear wireless router can be accessed via www.routerlogin.net or through the default IP 192.168.1.1 or 192.168.0.1.

Netgear router setup

Netgear router setupAccessing your Netgear wireless router for setup is quite an easy task and can be done much easier through this custom web address of www.routerlogin.net. If this web link fails to take you to the Netgear router setup page, then you can try to access the web setup page via the default IP 192.168.1.1 or 192.168.0.1.

  1. Before moving on to the core Netgear router setup, let us pay some attention to the initial hardware setup. For configuring the Netgear router for a cable internet connection, follow the steps mentioned below.
  2. After unboxing your brand new Netgear router, there will be several essential components like the Ethernet cords, power supply etc.
  3. Connect your modem to the router in the WAN port or Internet port (as applicable) with the help of an Ethernet cable and similarly connect the computer system to one of the LAN ports of the router with another Ethernet cable.
  4. Now switch on the power supply of all the devices i.e. modem, router, and the computer system and wait for the devices to reboot and get stable.

The configuration of the Netgear wireless router for cable internet connection. This is the most crucial part of making the network usable. Let us show how you can configure your Netgear wireless router for cable internet connection. Follow the steps mentioned below.

  1. Now that the power supply to all the devices is on and the hardware is stable, open the web browser on your computer system and enter the default IP 192.168.1.1 or 192.168.0.1 and enter.
  2. If this default IP address fails to get you to the admin login window of the router, then try to access the web setup page of the router through this custom web link i.e. www.routerlogin.net.
  3. Enter the router login username and password which is “admin” and “password”. These login details are case sensitive so enter them carefully.
  4. Select the setup wizard and the setup wizard will be displayed. Click Yes and click the Next button.
  5. The Smart setup wizard will detect the connection type itself and for the cable internet connection, it will detect the Dynamic IP.
  6. Now, select the yes and continue tabs and the internet connection will be set up on your Netgear router.
    Note- It is to be noted that you don’t have to change default settings until and unless your internet service provider has provided you with the specific DNS details.
  7. Click save and apply the settings button and then click the reboot tab to restart your Netgear router.
    Important- Make sure that this reboot at the end is done properly without any interruption because any interruption at the end can lead to the router malfunctioning.

I lost my internet connection, how do I get my connection back?

lost my internet connectionNow, before we can move on to any conclusion regarding this internet connectivity issue, let us get some possibilities uncovered due to which this internet connectivity issues can prevail.

Reasons/Symptoms

  1. Websites not loading
  2. Internet LED is not stable or amber in color
  3. Internet access failure on other devices too

Troubleshooting this internet access failure issue

  1. Now, what you can start with is to check all the cable connections between the router, modem and the computer.
  2. Make sure your Netgear router is connected to the modem in the Internet or WAN port with the designated Ethernet cord properly. Also, check if the Ethernet cords are damaged and if yes then please replace them with the new ones.
  3. Once you have checked all the wired connections, refresh all the networking hardware by restarting them (switch them off and on).
  4. If this issue is not resolved yet, you will have to reset your Netgear router then. Continue to read the article below to know how you can easily reset your Netgear router.

Netgear router reset

Netgear router resetNetgear has always kept it simple for its users whether it is the configuration of the device or reset itself. The Netgear wireless routers can be easily reset through the reset button provided underneath the router or on the back side.

Reset through the reset button

The reset through the reset button is the most convenient method of getting the networking device back to its original factory settings. Here is what you need to do, just follow the instructions carefully mentioned below.

  1. Make sure that your Netgear wireless router is connected to its power supply and it is stable enough for any changes to be made on it.
  2. Insert a pinpointed thing like a paper clip, needle or a paper pin etc. in the pinhole where the factory reset button is provided.
  3. Push and hold the reset button for at least 10 seconds or until the device gets rebooted. This reboot at the end of the process indicates that your Netgear wireless router has been reset to its original factory platform.

Where is the Netgear router reset button located?

Netgear router reset button locatedThe Netgear router reset button is located underneath the router’s body frame and in a deep pinhole. There is a reason why this Netgear router reset button is located in pinhole, this is because that the reset button has a very crucial working of erasing all the data from the router and getting it back to its factory version.

Therefore, this reset button has to be given at that place where it cannot be accessed easily as it can pose a threat to the router working. Small kids or infants or adults could accidentally push this reset button if it was located somewhere near the regular buttons on the router. This is why the Netgear router reset button has to be kept a little covered in a pinhole.

What is Netgear Genie?

The Netgear Genie is a web-based application that can be accessed on a desktop or on a smartphone. This Netgear Genie desktop and mobile application provides the user the access of their Netgear router. Users can access the live and real-time settings dashboard with a single touch. There are several major and minor benefits of using the Netgear Genie application for your Netgear networking and internet devices. Netgear Genie is a smarter way to get access to your network anytime from anywhere. Users can also monitor and repair their existing wireless network with this Netgear Genie. Some of the features of Netgear Genie have been listed below.

  1. Wireless settings
  2. Traffic metering
  3. Parental controls
  4. MyMedia
  5. Guest access

The list of features is not over yet, what else you can do is that you can easily control your Home Netgear network with the Genie dashboard available on a single click.

Stream media content like videos, audios with the help of a smartphone in which the Netgear router should have been accessed via the Netgear Genie application.

Get all the Wi-Fi analytics and statistics about your wireless network and its hardware through the Netgear Analytics mobile application.

Note- This Netgear genie application will not work and will be of no use if the smartphone is connected to the router’s guest network.

Netgear genie application also doesn’t work with an extended wireless network or the network in which wireless extender has been added.

How to update the Netgear r7000 firmware?

update the Netgear r7000 firmware
The Netgear r7000 firmware update is an easy job to be done.

Let us show how you can easily update the firmware of your Netgear R7000 wireless router. Follow the steps mentioned below to get the Netgear firmware update done.

  1. Assuming that you have an active wireless connection and all the devices are set up and stable.
  2. Open the web browser of your computer and enter the default IP 192.168.1.1 or 192.168.0.1 and if this IP fails to take you to the router’s admin login window, then try the custom web address www.routerlogin.net for setting up page access.
  3. Enter the router login username and password that you have set or carry on with the default login details which are “admin” and “password” by default.
  4. Now, select the ADVANCED>Administration tabs and then select the router firmware>update tabs.
  5. Check for any available Netgear firmware update files and if there are any pending update file to be downloaded, then select “yes, download and install firmware”.
  6. This will initiate the Netgear firmware update process in which the firmware update file will be downloaded and installed all itself.
  7. Users just have to wait for the Netgear r7000 firmware update process to be completed and at the end of the process; the device will get a reboot itself,
  8. Important- Just make sure that the reboot is not interrupted in any case as it can seriously damage the firmware of the router and the router can be rendered useless.

From where can I get the Netgear genie download?

The Netgear genie download is an easy process and the users can have their Netgear Genie application downloaded on all the operating systems and on any of the device i.e. desktop or on mobile phones etc.

Get the Netgear genie download from the Google play store or from the IOS application store etc.

If you need to install this Netgear genie application on your computer system, then download the Netgear Genie application from the windows application store. Once the Netgear genie download is done, open the application file with the extension of .apk etc. and install in the local memory of your computer system.

192.168.1.1 Login

Netgear wireless router’s admin page can also be accessed through this 192.168.1.1 login method. This 192.168.1.1 is the default static IP of most of the Netgear wireless routers and modems and the users need to enter it in the URL bar of the browser to get to the admin login window of the router.

192.168.1.1 Login failure

If this IP 192.168.1.1 login fails to get you to the router’s admin login window, then what you can do is try another IP 192.168.0.1 or try the custom local web address of www.routerlogin.net for the admin page access of the router.